Type

  • AE0112 Cutting application

    AE0112 Cutting application

    In the metal industry, devices for length division are frequently used. However, many standard solutions, presently available on the market, are not optimal for some companies. With Dimetix laser distance sensors, an inexpensive special model is offered.
    AE0203 Supervision of railway infrastructure

    AE0203 Supervision of railway infrastructure

    Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h, in order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.
    AE0505 Automated diameter & width measurement

    AE0505 Automated diameter & width measurement

    An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.
  • AE0104 Floodgate position measurement

    AE0104 Floodgate position measurement

    Dimetix laser distance sensors are used to monitor floodgates. This means that the amount of water outflow is known at all times. The sensors measure the exact position of the floodgates in millimeter-precision and absolutely contactless.
    AE0202 Monitoring of pressure tunnel

    AE0202 Monitoring of pressure tunnel

    An automatic monitoring system is used in a headwater pressure tunnel to measure the passive bias of penstocks during injections. As soon as the limit values were exceeded, an alarm lamp is illuminated, so that the injections can be stopped.
    AE0203 Supervision of railway infrastructure

    AE0203 Supervision of railway infrastructure

    Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h, in order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.
    AE0205 Monitoring of rockformation above railwaytrack

    AE0205 Monitoring of rockformation above railwaytrack

    Dimetix sensors are used to monitor a debris flow activity. These rocks can lead to the accumulation of a mountain stream, which can lead to a flooding of a rail track. In addition, two additional lasers are used to monitor a large boulder that moves downhill and warns communities in danger.
    AE0207 Movement of large structures

    AE0207 Movement of large structures

    In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to four Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.
    AE0209 Monitoring of railway tunnel

    AE0209 Monitoring of railway tunnel

    During construction work on railway infrastructure automated monitoring systems are crucial to early detect potentially hazardous structural deformations. As Ristag AG successfully demonstrated with this tunnel monitoring system, expensive standard surveying equipment can often be substituted by much more economical Dimetix laser distance sensors, while maintaining the demanded monitoring accuracy and reliability.
    AE0305 Monitoring of heritage materials

    AE0305 Monitoring of heritage materials

    In historic buildings the fabric can often become damaged. With the aid of a measuring concept, which includes Dimetix sensors, the evolution of historical buildings are monitored and examined.
    AE0503 Silo level measurements

    AE0503 Silo level measurements

    With Dimetix laser distance sensors, the level in silos can be exactly measured at any time. The Dimetix sensors measure on different surfaces, like stones, sand, grain or dark surfaces.
    AE0505 Automated diameter & width measurement

    AE0505 Automated diameter & width measurement

    An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.
    AE0506 Monitoring transfer car position

    AE0506 Monitoring transfer car position

    In a steel production facility, large transfer cars transport glowing steel plates. Due to a malfunction of the micro-switches, cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, smooth operation could be restored.
    AE0508 Measuring flood gate height

    AE0508 Measuring flood gate height

    The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distances on the surface of the flood gates.
    AE0510 Bridge structural monitoring

    AE0510 Bridge structural monitoring

    Dimetix made history in 2010 by collaborating with Applied Geomechanics, Inc., to develop a system to monitor the lift and placement of steel bridge truss sections on the Huey P. Long Bridge over the Mississippi River in New Orleans. The project involved transportation by river barge, the lifting and placement of the pre-assembled bridge truss spans to reduce stress on the bridge and minimize interruption of traffic. Ten DLS-C laser distance sensors were lifted aboard the 2,700 ton trusses and were used in conjunction with specially fabricated targets and software developed to monitor beam deflection during the day-long lift.
    AE0511 Structural health monitoring

    AE0511 Structural health monitoring

    In modern urban environments, heavy construction often must be conducted immediately adjacent to properties and structures that must remain open to business or residency during excavation and construction. Traditional surveying techniques allow for +/-5 mm precision of displacement, but Dimetix laser distance sensor technology allows for measurements with sub-millimeter accuracy at distances up to 500 m to detect any shift or displacement of structures.
    AE0601 Lifting of mining equipment

    AE0601 Lifting of mining equipment

    In mining applications, Dimetix laser distance sensors have been used to ensure accurate lifting and lowering processes of superstructures. In the case of a deviations, a signal was sent to the hydraulic system so that corrections can be made.
    AE1102 Controlling of the filling and pour of steel and iron

    AE1102 Controlling of the filling and pour of steel and iron

    Dimetix sensors were installed in foundries to monitor the moulding of hot steel and iron. With the aid of the sensors, fluid levels can be measured and an overflows avoided.
  • AE0401 Truck position measurement

    AE0401 Truck position measurement

    In times of increasing traffic and ever more demanding tasks where time is of the essence, a system has been developed to speed up customs inspections on HGV vehicles. This device significantly helps to reduce time consumption checking up on vehicles as the positioning of trucks can be done with sensors. Customs uses mobile X-Ray scanners to examine the content of trucks and containers. During the scanning process, movements of the scanner must be precisely determined.
    AE0502 Glass panel measurement

    AE0502 Glass panel measurement

    In order to transport glass panels, they are positioned after production from a conveyor belt onto a pallet. To prevent glass breakage, a system of DIMETIX sensors has been developed to precisely monitor positioning.
    AE0506 Monitoring transfer car position

    AE0506 Monitoring transfer car position

    In a steel production facility, large transfer cars transport glowing steel plates. Due to a malfunction of the micro-switches, cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, smooth operation could be restored.
    AE0507 Saw blade alignment

    AE0507 Saw blade alignment

    Large saw blades used for cutting different materials frequently shift out of alignment, resulting in cuts at wrong angles, unnecessary reworking and wasted scrap. Our maintenance-free laser distance sensor saw blade alignment system provides a reliable, repeatable and cost-effective means of improving production quality and eliminating unnecessary scrap.
    AE0508 Measuring flood gate height

    AE0508 Measuring flood gate height

    The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distances on the surface of the flood gates.
    AE0509 Laser controlled cut-off solution

    AE0509 Laser controlled cut-off solution

    Increasing operational demands, a multiplicity of maintenance requirements and the growing importance for efficiency are crucial factors in nearly all industries. This is relevant for metal production and especially true for small and medium-sized companies at the heart of manufacturing and metalworking. Laser measurement technology provides an economical approach to reducing production delays and improving quality. Our affordable technological advantage helps you increase efficiency.
    AE0601 Lifting of mining equipment

    AE0601 Lifting of mining equipment

    In mining applications, Dimetix laser distance sensors have been used to ensure accurate lifting and lowering processes of superstructures. In the case of a deviations, a signal was sent to the hydraulic system so that corrections can be made.
    AE0701 Length positioning of wood binders

    AE0701 Length positioning of wood binders

    Spruce wood has been produced at our customer's facility for decades with great care and professional competence, as spruce wood is not a freely interchangeable material, the crucial difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cutting for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are therefore used daily. Truss length measurement is used for positioning and to enhance their operational efficiency.
  • AE0207 Movement of large structures

    AE0207 Movement of large structures

    In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to four Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.
    AE0701 Length positioning of wood binders

    AE0701 Length positioning of wood binders

    Spruce wood has been produced at our customer's facility for decades with great care and professional competence, as spruce wood is not a freely interchangeable material, the crucial difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cutting for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are therefore used daily. Truss length measurement is used for positioning and to enhance their operational efficiency.
  • AE0503 Silo level measurements

    AE0503 Silo level measurements

    With Dimetix laser distance sensors, the level in silos can be exactly measured at any time. The Dimetix sensors measure on different surfaces, like stones, sand, grain or dark surfaces.
    AE0702 Distance measurement for rammed clay production

    AE0702 Distance measurement for rammed clay production

    The company Lehm Ton Erde Baukunst GmbH in Schlins, Austria, produces rammed clay walls with natural products, the production of which is monitored with Dimetix sensors.
    AE1102 Controlling of the filling and pour of steel and iron

    AE1102 Controlling of the filling and pour of steel and iron

    Dimetix sensors were installed in foundries to monitor the moulding of hot steel and iron. With the aid of the sensors, fluid levels can be measured and an overflows avoided.
  • AN2001 Numeric digital display

    AN2001 Numeric digital display

    This application note shows how to read a measured distance value from a standard external numeric digital display. Descriptions of the wiring and sensor configuration are included and two samples are shown.

    AN2002 SSI interface usage

    AN2002 SSI interface usage

    SSI is a widely used serial interface standard for industrial applications between a master (for example, controller) and a slave (for example, a Laser Distnace Sensor). On an SSI communication channel, the master generates a clock, while the slave sends the data corresponding to the clock signal received. Only point-to-point communication is possible with the SSI interface. The RS-422 standard defines the electrical signal levels of the SSI interface.

    AN2003 RS-422 connection to RS-485

    AN2003 RS-422 connection to RS-485

    This document explains how to connect the RS-422 interface of the laser distance sensor to an RS485 two-wire interface. For this Application Note it is mandatory to observe the following: The RS-485 uses only one communication line (TX & RX on the same line), therefore sensor commands with continuous output must not be used. For more details see the technical documentation.
    AN2004 EXCEL Example

    AN2004 EXCEL Example

    This application note describes how to control a Dimetix distance sensor connected to a serial interface by VBA (Visual Basic for Application). The VBA program is integrated into an EXCEL worksheet.
    AN2006 Timed measurement characteristic example

    AN2006 Timed measurement characteristic example

    The Laser Distance Sensor offers configuration possibilities for fixed time measurements. This application note gives some configuration examples and describes the specialities of the timed measurement characteristics.
    AN2007 Additional measurement filter – distance jump

    AN2007 Additional measurement filter – distance jump

    The D-Series Laser Distance Sensors provide a wide range of configuration possibilities. This document shows how to configure the distance jump detection feature. This feature works like a plausibility check of the measured distance. In typical use, cases offer positioning applications (for example, in logistics).
    AN2008 Additional measurement filter – Signal monitoring

    AN2008 Additional measurement filter – Signal monitoring

    This document shows how to configure the signal monitoring function. This feature works like a plausibility check of the signal value of the latest distance measurement. A typical use cases can be positioning applications e.g. in the logistics.
    AN2010 S7 connection to RS422

    AN2010 S7 connection to RS422

    This application note describes how to connect a Laser Distance Sensor to a CP340 interface of a Siemens S7 PLC. Configuration and wiring are described. In addition to this application note an example for the S7 is also included on our website.
    AN2011 Moving Target Characteristic

    AN2011 Moving Target Characteristic

    Many position control tasks require fast and precise distance measurement with a constant output rate. Especially for these requirements the Dimetix laser distance sensors provide the Moving Target measurement characteristics.
    AN2018 Moving target characteristic with RS-422

    AN2018 Moving target characteristic with RS-422

    The moving target characteristic has been created for fast position measurement on continuously moving targets. This document describes the necessary settings of the laser distance sensor for the moving target characteristic as well as the configuration of the RS-422 interface.
    AN2019 Moving target characteristic with SSI

    AN2019 Moving target characteristic with SSI

    The moving target characteristic has been made for fast position measurement on continuously moving targets. This document describes the necessary settings of the Laser Distance Sensor for the moving target characteristic as well as the configuration of the SSI and Analog interface.
    AN2020 Positioning with SEW drives

    AN2020 Positioning with SEW drives

    This document describes how to use the FLS-C sensor in a positioning application in conjunction with a SEW servo drive. The necessary configuration of the FLS-C and the configuration of the SEW inverter are described . Further the wiring is also documented.
    AN2040 Getting started with PROFINET

    AN2040 Getting started with PROFINET

    This is a simple example of how to get started with the PROFINET® interface of the Dimetix D-Series Laser Distance Sensors. All information and instructions necessary to understand this example of useage and to run this on a Siemens SIMATIC S7 PLC are included.
    AN2041 Getting started with EtherNetIP

    AN2041 Getting started with EtherNetIP

    This is a simple example of how to get started with the EtherNet/IP™ interface of the Dimetix D-Series Laser Distance Sensors. All information and instructions necessary to understand this example of useage and to run this on an Allen Bradley CompactLogix PLC are included.
    AN2042 Getting started with EtherCAT

    AN2042 Getting started with EtherCAT

    This is a simple example of how to get started with the EtherCAT® interface of the Dimetix D-Series Laser Distance Sensors. All information and instructions necessary to understand this example of useage and to run this on a Beckhoff EtherCAT® master PLC are included.