Accessory

500700 PROFINET Interface for D-Series

500700 PROFINET Interface for D-Series

Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500701 EtherNet/IP Interface for D-Series

500701 EtherNet/IP Interface for D-Series

Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500702 EtherCAT Interface for D-Series

500702 EtherCAT Interface for D-Series

Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500595 Accessories for Starter Kit D-Series

500595 Accessories for Starter Kit D-Series

USB-cabel 2m Power supply USB-Stick with Manual, Utility Software and Accessories summary country of origin: Switzerland TN:9015.1000
500590 Starter Kit DLS/FLS

500590 Starter Kit DLS/FLS

The starter kit accessories helps to familiarize with DLS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a DLS Sensor. Consisting of:
  • RS-232 configuration cable (500200)
  • Power Supply (In: 100 ... 240 VAC, 0.6A Out: 24 VDC, 0.75 A)
  • DLS Utility Software
  • DLS-C Manual

Not usable for devices with extendet temperature range (heater)

FLS/DLS Distance Laser Sensor must be ordered separately

500592 Starter Kit EDS-C

500592 Starter Kit EDS-C

The starter kit accessories helps to familiarize with EDS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a EDS Sensor. Consisting of:
  • RS-232 configuration cable (500204)
  • Power Supply
  • EDS-C Utility Software

EDS-C Laser Distance Sensor must be ordered separately

500113 Reflective Plate 210 x 297 mm

500113 Reflective Plate 210 x 297 mm

Reflective plate 210 x 297 mm (orange) applicable distance range DLS: from about 25m to 500m applicable distance range FLS: from about 0.5m to 500m
500114 Reflective Foil 600 x 1200mm

500114 Reflective Foil 600 x 1200mm

Reflective foil 600 x 1200 mm (orange) for self fitting, applicable distance range DLS: from about 25m to 500m FLS: from about 0.5m to 500m
500215 Numeric Digital Display

500215 Numeric Digital Display

Numeric digital display 6 digits Char. height 14mm; LED red; RS-232/485; Reading distance: 1…5m applicable for DLS/FLS
500300 Spare part kit D-Series

500300 Spare part kit D-Series

Includes 10Pcs. of: - Cable Glands M16x1.5, black, Plastic - Hexagonal nut brass M16x1.5 - Terminal Block1 coded and printed - Terminal Block2 coded and printed - Set Screw M4x4Tuflock - Rear Screw Freedriv M2.5x18.5mm; Country of origin: Switzerland; TN: 9015.9000
500200 RS-232 Configuration Cable FLS/DLS

500200 RS-232 Configuration Cable FLS/DLS

RS-232 Configuration cable DLS/FLS Length = 3m, with 15 pin connector IP65 and 9 pin connector This RS232 configuration cable is made to connect Laser Distance Sensor DLS/FLS to the PC and a power supply for easy configuration.
500204 RS-232 Configuration Cable EDS-C

500204 RS-232 Configuration Cable EDS-C

Length = 3m, with M12 5 pin connector IP65 and 9 pin D-sub connector applicable for EDS
500205 Sensor cable, A-Coded, 5pole, 5m, female

500205 Sensor cable, A-Coded, 5pole, 5m, female

with M12 5pin sensor-connector IP65, other side open ends country of origin: Italy; TN: 8544.4190
500203 RS-422/SSI Connection Cable FLS/DLS

500203 RS-422/SSI Connection Cable FLS/DLS

RS-422 Connection cable DLS/FLS Length = 5m, with 15 pin connector IP65   Special lenghts on request. Please contact us.
500209 Converter USB to RS-232

500209 Converter USB to RS-232

USB to serial port converter. It provides a connection from the sensor to the USB port of a PC, notebook or handheld computer device.
500213 Alignement Jig

500213 Alignement Jig

Adjusting angle: ±7° in two directions Material: stainless steel (V2A) Recommended for distances up to 50m Applicable for EDS/DLS/FLS
500206 Sensor cable, 2x D-Coded, 4pole, 5m, male

500206 Sensor cable, 2x D-Coded, 4pole, 5m, male

with M12 4pin male sensor-connectors IP65 on both sides, cable color: green, for Industrial Ethernet country of origin: Taiwan; TN: 8544.4190
500207 Sensor cable, D-Coded-RJ45, 5m

500207 Sensor cable, D-Coded-RJ45, 5m

with M12 4pin male sensor-connector to RJ45, cable color: green, for Industrial Ethernet country of origin: Taiwan; TN: 8544.4190