EDS-C – the simple and economic solution
-
Product type Produkttyp Product type Part No. Artikel-Nr. Part No. Specifications Spezifikation Specifications Measuring range on reflective foil Messbereich auf Reflexionsfolie Measuring range on reflective foil Measuring range on natural surfaces Messbereich auf natürliche Oberflächen Measuring range on natural surfaces Typical accuracy @ 2σ Typische Genauigkeit @ 2σ Typical accuracy @ 2σ Repeatability typ. Typische Wiederholungsgenauigkeit Repeatability typ. Max measuring rate Max. Messrate Max measuring rate Operating temperature Betriebstemperatur Operating temperature Degree of Protection Schutzart Housing Power supply Versorgungsspannung Power supply Laser red, visible Laser rot, sichtbar Laser red, visible Diameter laser dot at 10m Durchmesser Laserpunkt bei 10m Diameter laser dot at 10m Diameter laser dot at 50m Durchmesser Laserpunkt bei 50m Diameter laser dot at 50m Diameter laser dot at 100m Durchmesser Laserpunkt bei 100m Diameter laser dot at 100m Dimensions (l x w x h) Abmessungen (l x b x h) Dimensions (l x w x h) Weight Gewicht Weight Interfaces Schnittstellen Interfaces Analog output, programmable, 0/4...20 mA Analogausgang, programmierbar, 0/4...20 mA Analog output, programmable, 0/4...20 mA Max error analog output Max. Fehler des Analaogausganges Max error analog output 2 digital outputs, programmable 2 digitale Ausgänge, programmierbar 2 digital outputs, programmable 1 digital output, error display 1 digitaler Ausgang für die Fehleranzeige 1 digital output, error display 1 digital input, programmable (instead of DO1) 1 digitaler Eingang, programmierbar (anstelle DO1) 1 digital input, programmable (instead of DO1) RS-232 RS-232 RS-232 RS-422 with programmable ID RS-422 mit programmierbarer ID RS-422 with programmable ID SSI SSI SSI PROFINET (option) PROFINET (option) PROFINET (option) EtherNetIP (option) EtherNetIP (option) EtherNetIP (option) EtherCAT (option) EtherCAT (option) EtherCAT (option) PROFIBUS (extern) PROFIBUS (extern) PROFIBUS (extern) Connection Anschlussart Connection Internal screw terminal Interne Anschlussklemmen Internal screw terminal Features Funktionen Features Auto start Auto Start Auto start Direct connectivity of an external remote display Direktes Anschliessen einer externen Anzeige Direct connectivity of an external remote display External trigger for measurements Externe Auslösung von Messungen External trigger for measurements -
Cutting application
In the metal industry, devices for length division are frequently used. However, many standard solutions, which are available on the market, are not optimal for some companies. With Dimetix laser distance sensors, an economical special model can be offered. -
500592 Starter Kit EDS-C
The starter kit accessories helps to familiarize with EDS-C Distance-Laser-Sensors. The Kit includes all necessary Components to operate a EDS-C Sensor. Consisting of:- RS-232 configuration cable (500204)
- Power Supply (In: 100 ... 240 VAC, 0.6A Out: 24 VDC, 0.75 A)
- EDS-C Utility Software
EDS-C Distance Laser Sensor must be ordered separately
500204 RS-232 Configuration Cable EDS-C
Length = 3m, with M12 5 pin connector IP65 and 9 pin D-sub connector applicable for EDS
500205 Sensor cable, A-Coded, 5pole, 5m, female
with M12 5pin sensor-connector IP65, other side open ends country of origin: Italy; TN: 8544.4190
500209 Converter USB to RS-232
USB to serial port converter. It provides a connection from the sensor to the USB port of a PC, notebook or handheld computer device.
500213 Alignement Jig
Adjusting angle: ±7° in two directions Material: stainless steel (V2A) Recommended for distances up to 50m Applicable for EDS -
Datasheets
Manual current
Flyers
